Use Venimex to remove poison after being bitten or stung by an insect or arachnid. In this way you will prevent the poison from spreading in the body. The poison extractor is effective against bites and stings of wasps, bees, spiders and scorpions. The automatic vacuum pump has a strong suction power (800 millibar) and is easy to operate with one hand. The suction caps can be used in three ways.
Place the poison extractor on the bite site and press it down firmly until the pump opens. Let the automatic vacuum pump suck for 1 - 5 minutes. The Venimex is suitable for all age groups. This is a first aid measure. In serious cases, call for medical assistance.
1x poison aspirator, 2x suction cap
Step 1: Use the poison extractor after a bite or sting of a wasp, bee, spider or scorpion. In the event of a scorpion sting, immediately call for medical attention.
Step 2: Choose the correct suction cap. Use the small suction cap for uneven body parts (e.g. knees or fingers). The small suction cap can be attached to the pump in two ways
Step 3: Place the poison aspirator on the bite site.
Step 4: Press the poison aspirator down firmly until the pump opens.
Step 5: Let the automatic vacuum pump suck for one minute. (5 minutes in case of a scorpion sting).
Step 6: Remove the pump by holding it at an angle until an opening for air is formed at the suction cap. Disinfect the wound with alcohol-free antiseptic.
Step 7: Clean the suction cap with soap and water or with an antibacterial cloth. Do not rinse the pump itself.
Step 8: Block the pump for storage. To do this, push the pump in and press on the tabs on both sides. Store the pump in its protective cover in a dry place at room temperature.