Alpina Valparola Helmet black matt

The roads, the mountains, the climbs, the descents: this is the world of Valparola. The light racing helmet convinces with its low weight and excellent ventilation. The development also focused on aerodynamics. Thanks to the 27 large openings, the head is always well ventilated. The low weight is due to the Inmold production, in which the upper shell of the helmet is thermally connected to the Hi-EPS. This results in a firm surface connection, which is responsible for a very stable construction.

The special feature of the Valparola: it consists of a three-part shell system, which gives each helmet part a maximum of stability. With the Ergo Pro Run System, combined with the height-adjustable Custom Fit, the helmet can be perfectly adapted to the head. A further plus for comfort: the removable, antibacterial padding. Fly screens keep insects away from the head, the optional shield guarantees optimum protection in the field of vision. The lower edge of the helmet is protected by the Edge Protect polycarbonate shell. 

Run System Ergo Pro
The Run System allows the size of all Alpina helmets to be individually adjusted using a smooth-running rotating wheel. The two large wing-shaped headrests are striking features of the high-quality Ergo Pro Run System. They are made of a two-component mix of plastic and rubber. This guarantees maximum comfort. Since the year 2014 the Run System Ergo Pro is available in colours matching the helmet.

Y-Clip
A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixation of the two straps under the ear plays a decisive role. The Y-Clip system guarantees millimetre-precise adjustment - in a matter of seconds.

Ergomatic
Proven hundreds of thousands of times and used on all Alpina helmets: the belt buckle with the red push button and multi-stage automatic snap-in mechanism. Ergomatic can be operated with one hand - you can loosen the strap uphill, tighten it downhill - and in the event of a fall it is not possible for the locking mechanism to open automatically.

Edge Protect
Edge Protect is an additional polycarbonate sheet that refines Inmold helmets. It covers edges on the underside of the helmet. This protects the Hi-EPS and increases the longevity of the helmet. At the same time, the neck and shoulder area of the rider is protected against injuries from the helmet in the event of an impact and contact with the lower edge of the helmet.

Airflow Vents
One factor that strongly influences the wearing comfort is the ventilation of the helmet. The strategically sensible arrangement of the ventilation openings is decisive for optimum ventilation of the interior. The air is directed into the interior, directed along the head and can then flow out again at the rear. The head is therefore always pleasantly air-conditioned.

HI-EPS
The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrol). The material has microscopically small air chambers which absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time enables extra-thin wall thicknesses and narrow helmet shapes.

inmold
In the Inmold production process, the polycarbonate helmet shell is thermally bonded to the Hi-EPS inner shell of the helmet body under great heat and pressure. This creates a large-area and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Ceramic Shell
All Alpina helmets manufactured using the Inmold process receive a robust Ceramic Shell. A polycarbonate plate is stretched under high heat onto the shape of the later helmet and pressed under high pressure onto the Hi-EPS body and thermally connected to it. The Ceramic Shell is characterized by several qualities: It is break- and scratch-resistant, UV-stable and antistatic.