The bag is produced in 2 sizes differing in the length of the bag (M = 40 cm and L = 48 cm ). Used main material Nylon 6.6 (PU coating 1500mm H20), durable and light synthetic fabric. The circumference of the bag is reinforced with a thicker fabric for higher abrasion resistance and padded with foam so that the bag holds its shape well and its filling does not damage the frame while driving. Closing the bag with a water-repellent YKK zipper with two sliders allows you to open the bag from the left or right side and get directly to the desired contents of the bag. Zipper pullers and garages are made of durable and non-slip Hypalon material. The bag is attached to the frame using 7 Velcro straps (these must be shortened to the required length according to your frame). In the front part of the bag there is a Nylon strap with a Nifco buckle. At the same place (under the upper frame tube) there is an outlet on the camelbag hose. Deformed seams are secured with the so-called Bartack stitch (zigzag), all yarns used are Polyester with a large fiber diameter for maximum strength.